Identifikasi Potensi Bahaya di Ruang Tunggu Penumpang Bus Trans Kota Batam

Authors

  • Adi Nugroho Universitas Universal

DOI:

https://doi.org/10.54324/j.mtl.v8i1.512

Keywords:

potential risk, FMEA

Abstract

Bus stop is one of the facilities it must be used by users of trans batam service. All facilities are built to provide convenience and comfort for users who used these services. Unfortunately, the repair efforts still left unfinished homework. Starting from the shape and size of different dimensions of facilities, as well as conformity to the needs of service users to safety aspects it must be fulfilled by providers. Through observational studies (observations) and literature studies, this study seeks to identify potential hazards that may occur in existing facilities in the bus stop area. This study uses a random sampling technique to obtain actual data / information by focused on the location (passenger waiting room) which has access to stop routes from various routes in Batam City, starting from the Batam Center and Batu Aji areas. Data analysis uses descriptive qualitative techniques, and combines with failure mode effect analysis (FMEA) techniques to obtain priority information on potential hazards that may occur based on the consensus of several parties who have a relationship with the service. Based on the results of analysis that has been done, information on 10 priorities of the highest potential hazards that may occur and become a priority for immediate improvement

Author Biography

Adi Nugroho, Universitas Universal

Teknik Industri

References

BSN. (2015). Spesifikasi Geometri Teluk Bus. SNI 2838:2(ICS : 93.080.01).

Departemen Pekerjaan Umum. (1998). Persyaratan Teknis Aksesibilitas pada Bangunan Umum dan Lingkungan.

Farajiparvar, N., & Mayorga, R. V. (2018). Maintenance policy selection using fuzzy failure modes and effective analysis and key performance indicators. International Journal of Productivity and Quality Management, 25(2), 170. https://doi.org/10.1504/ijpqm.2018.094760

Fattahi, R., & Khalilzadeh, M. (2018). Risk evaluation using a novel hybrid method based on FMEA, extended MULTIMOORA, and AHP methods under fuzzy environment. Safety Science, 102, 290–300. https://doi.org/10.1016/j.ssci.2017.10.018

Guinot, J., Sinn, J. W., Badar, M. A., & Ulmer, J. M. (2017). Cost consequence of failure in failure mode and effect analysis. International Journal of Quality and Reliability Management, 34(8), 1318–1342. https://doi.org/10.1108/IJQRM-06-2016-0082

Haris, D. (2018). KUALITAS DAN DESAIN PRODUK DALAM MENINGKATKAN KEPUASAN DAN LOYALITAS KONSUMEN (STUDI KASUS BAJU DAGADU YOGYAKARTA). Upajiwa Dewantara, 2(2), 125–139. https://doi.org/10.26460/mmud.v2i2.3265

Jain, K. (2017). Use of failure mode effect analysis (FMEA) to improve medication management process. International Journal of Health Care Quality Assurance, 30(2), 175–186. https://doi.org/10.1108/IJHCQA-09-2015-0113

Kato, T., Sekiguchi, Y., Honda, K., Izumi, S. I., & Kanetaka, H. (2020). Comparison of handrail reaction forces between two different handrails during sit-to-stand movement in the elderly. Clinical Biomechanics, 80. https://doi.org/10.1016/j.clinbiomech.2020.105130

Komisar, V., Nirmalanathan, K., King, E. C., Maki, B. E., & Novak, A. C. (2019). Use of handrails for balance and stability: Characterizing loading profiles in younger adults. Applied Ergonomics, 76, 20–31. https://doi.org/10.1016/j.apergo.2018.11.006

Kurniawan, H. (2017). Tipologi Renovasi Aksesibilitas Halte Trans Jogja. November. https://doi.org/10.14421/ijds.010101

Lathifah, N. N., & Sadika, F. (2019a). Perancangan Ulang Komponen Halte Tmb Berdasarkan Kebutuhan Penyandang Disabilitas { Studi Kasus Manusia Lanjut Usia ( Lansia )} Redesign of Tmb Bus Stop Component Based on the Needs of People With Disabilities { Case Study of Elderly People }. 6(2), 3208–3219.

Lathifah, N. N., & Sadika, F. (2019b). Redesign of TMB Bus Stop Component Based on The Needs of People With Disabilities (Case Study of Elderly People). 6(2), 3208–3219.

Maki, B. E., Bartlett, S. A., & Fernie, G. R. (1984). Influence of stairway handrail height on the ability to generate stabilizing forces and moments. Human Factors, 26(6), 705–714. https://doi.org/10.1177/001872088402600610

Mariska, I. E., & Indrani, H. C. (2011). STUDI PERSYARATAN TANGGA DARURAT PADA RUMAH TOKO DI SURABAYA. Dimensi Interior. https://doi.org/10.9744/interior.8.1.15-28

Muslich, M., & Rulliaty, S. (2011). KELAS AWET 15 JENIS KAYU ANDALAN SETEMPAT TERHADAP RAYAP KAYU KERING, RAYAP TANAH DAN PENGGEREK DI LAUT. Jurnal Penelitian Hasil Hutan. https://doi.org/10.20886/jphh.2011.29.1.67-77

Mutlu, N. G., & Altuntas, S. (2019). Risk analysis for occupational safety and health in the textile industry: Integration of FMEA, FTA, and BIFPET methods. International Journal of Industrial Ergonomics, 72, 222–240. https://doi.org/10.1016/j.ergon.2019.05.013

Nugroho, A., Medra, D., Studi, P., Industri, T., & Putera, U. (2017). Redesain Ruang Tunggu Penumpang Bus Trans Kota Batam : Studi Teknis Evaluasi Layanan Transportasi Publik. 3(1), 36–49.

Nurjannah, & Eko Putri Hadi Winarsih. (2019). IDENTIFIKASI KEBUTUHAN PENGGUNA KURSI SANDAR DI PERON STASIUN. Jurnal ASIIMETRIK: Jurnal Ilmiah Rekayasa & Inovasi. https://doi.org/10.35814/asiimetrik.v1i2.816

Philbin, S. P. (2010). Developing an integrated approach to system safety engineering. EMJ - Engineering Management Journal, 22(2), 56–67. https://doi.org/10.1080/10429247.2010.11431864

Prastawa, H., Mahachandra, M., Purwaningsih, R., & Satriyo, E. (2018). Redesain Fasilitas Tangga Sebagai Evaluasi Ergonomi dengan Kerangka Ideas dan Analisis Posture Evaluation Index pada Objek Wisata Muria Kudus. Jurnal Ergonomi Dan K3. https://doi.org/10.5614/j.ergo.2018.3.2.3

Rosanti, E., & Wulandari, D. (2016). PENGARUH PERBAIKAN KURSI KERJA TERHADAP KELUHAN MUSKULOSKELETAL PADA PEKERJAAN MENJAHIT DI DESA X. Journal of Industrial Hygiene and Occupational Health. https://doi.org/10.21111/jihoh.v1i1.605

Setiawan, A. (2020). Pengaruh Halte Bus Trans Semarang terhadap Kinerja Lalu Lintas Pada Jalan 2/2 TT (Studi Kasus: Jalan Dokter Wahidin). Jurnal Talenta Sipil. https://doi.org/10.33087/talentasipil.v3i2.29

Shankar, R., Choudhary, D., & Jharkharia, S. (2018). An integrated risk assessment model: A case of sustainable freight transportation systems. Transportation Research Part D: Transport and Environment, 63, 662–676. https://doi.org/10.1016/j.trd.2018.07.003

Suryatman, T. H., & Ramdani, R. (2019). Desain Kursi Santai Multifungsi Ergonomis dengan Menggunakan Pendekatan Antropometri. 4(1), 45–54.

Zhu, Y. M. (2017). Software failure mode and effects analysis. In SpringerBriefs in Computer Science (Issue 9783319651026, pp. 7–15). https://doi.org/10.1007/978-3-319-65103-3_2

Downloads

Published

2021-10-26

Issue

Vol. 8 No. 1 (2021): MARET

Section

Articles

License

Authors who publish with this journal agree to the following terms:

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).