Analisis Kapasitas Tingkat Pelayanan dan Kinerja Ruas Jalan Inspeksi Kalimalang
DOI:
https://doi.org/10.54324/j.mtl.v8i3.517Keywords:
Performance, Service Level, Inspeksi Kalimalang Street, MKJI 1997, IndustryAbstract
Inspeksi Kalimalang Street is the street connecting to industrial areas of Jababeka, MM2000, EJIP, Delta Mas and other industrial areas. According to Detik Finance (2017), 2.125 factory units of 25 countries locate in area of Bekasi District, Because mobility of in-out industrial vehicles transporting raw materials or products from and to export destinations are high, vehicles frequently collect in Inspeksi Kalimalang Street. This study aims at analyzing capacity of service level and performance of Inspeksi Kalimalang Street and analyzing comparison of line change based on (MKJI 1997). The results of analysis indicate that street condition with lane (2/2 UD) of segment one had service level F with mean capacity value (C)=2674,136 smp/hour in west direction and 2728,394 smp/hour in east direction. Mean saturation degree value of segment one (DS) = 0,821 in west direction and 0,776 in east direction > 0,75 as MKJI recommended. Whereas the result of lane widening comparison into (4/2 D) in segment one had service level D, where mean capacity value of segment one (C)=3130,807 smp/hour in west direction and 3265,890 smp/hour in east direction. Mean saturation degree value of segment one (DS) = 0,700 in west direction and 0,647 in east direction < 0,75 as MKJI 1997 recommended.References
Departemen Pekerjaan Umum Direktorat Jendral Bina Marga Direktorat Bina Jalan Kota Republik Indonesia. Manual Kapasitas Jalan Indonesia (MKJI) 1997. Tentang Prosedur Perhitungan Jalan Perkotaan. Jakarta.
[Kemenhub RI] Kementrian Perhubungan Republik Indonesia. 2006. Keputusan Mentri Perhubungan Republik Indonesia Nomor 14 Tahun 2006 tentang Manajemen Dan Rekayasa Lalu Lintas Di Jalan. Jakarta: Kemenhub RI
[Disdukcapil] Dinas Kependudukan dan Catatan Sipil Kabupaten Bekasi. 2020. Tentang Data Jumlah Penduduk Kabupaten Bekasi. Bekasi: Disdukcapil.
[BPS] Badan Pusat Statistik Kabupaten Bekasi. 2020. Tentang Tingkat Pertumbuhan Ekonomi Kabupaten Bekasi. Bekasi: BPS Kabupaten Bekasi.
Undang-Undang Republik Indonesia Nomer 38 Tahun 2004 Tentang Jalan
[Dinas PUPR] Dinas Pekerjaan Umum dan Penataan ruang Kabupaten Bekasi. 2020. Data peta Jaringan Jalan Kabupaten Bekasi. Bekasi. Dinas PUPR.
Putranto, Leksomono S. (2016). Rekayasa Lalulinas Edisi 3. Jakarta: Penerbit Indeks.
Tamin, Ofyar Z, 1997. Perencanaan dan Permodelan Transportasi Edisi kesatu. Bandung: Penerbit ITB.
Transportation Research Board, 1994. Highway Capacity Manual, HCM. Washington, D.C.
Hobbs, F.D, 1995. Perencanaan dan Teknik Lalu Lintas. Penerbit Gajah Mada University Press.
Reswanto, Burniandito S. (2007). “Identifikasi Kinerja Beberapa Ruas Jalan Raya Utama Menuju Pusat Kota Depok”. Skripsi. Fakultas Teknik. Departemen Teknik Sipil. Universitas Indonesia. Depok.
Ismardani (2012). “Pengaruh Aspek Sosial Ekonomi Masyarakat Terhadap Bangkitan Pergerakan Zona Kemacetan Di Kota Palu” dalam Jurnal: Rekayasa Dan Manajemen Transportasi Volume 2, Nomer 2. Untad.
Afandi, Ari A. (2010). “Optimasi Pemanfaatan Jalan Margonda Raya Depok Dengan Metod Value Engineering”. Skripsi. Fakultas Teknik. Program Studi Teknik Sipil. Universitas Indonesia. Depok.
Muhtadi, Adhi. (2010). “Analisis Kapassitas, Tingkat Pelayanan, Kinerja dan Pengaruh Pembuatan Median Jalan” dalam: Jurnal Neutron Volume 10, Nomor 1. Jombang. Neutron.
Finance.detik.com. 29 Agustus 2017. Kawasan Industri Cikarang Terbesar di Asia Tenggara. Diakses pada 18 Oktober 2020. Dari https://finance.detik.com/advertorial-news-block/d-3619600/kawasan-industri-cikarang-terbesar-di-asia-tenggara.
Wikrama, Jaya A N. (2017). “Kajian Biaya Perjalanan Akibat Lalu Lintas Di Ruas Jalan Kartika Plaza kabupaten Badung”. Dalam Jurnal Ilmiah Teknik Sipi Volume 21 Nomor 1. Bali. Universitas Udayana.
Universitas Teknologi Yogyakarta. (2019). Pedoman Teknis Penulisan Laporan Tugas Akhir FST Universitas Teknologi Yogyakarta. Yogyakarta.
Downloads
Additional Files
Published
Issue
Section
License
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).