Faktor Penyebab dan Upaya Mengatasi Area Titik Buta pada Truk

Muhammad Ilhamdi Rusydi, Yoan Winata, Dhiny Yurichy Putri, Muhammad Fikri

Abstract


Truck drivers cannot see the entire area around the vehicle. This area that cannot be seen is called a blind spot. This article aims to analyze the factors causing blind spot areas on trucks and discuss the efforts that have been made to address the blind spots on trucks. The writing method used is a literature study of the research that has been done. The keywords used in the reference search include blind spot, driver and anthropometry. The search results show that the blind spot area is on each side of the truck, either caused by the vehicle design or the driver's anthropometry. Various attempts have been made to address blind spot areas, such as the use of mirrors, cameras and sensors. In addition, expanding the driver's vision area from inside the cabin can also be a solution. Based on the results of the literature study, it is concluded that the blind spot area is influenced by vehicle design and driver anthropometry

Keywords


blind spot, truck, driver's vision, anthropometry

Full Text:

PDF

References


Ajay, T S, & R Ezhil. (2016). Detecting Blind Spot By Using Ultrasonic Sensor. International Journal of Scientific & Technology Research 5 (5), 195–96.

Beeck, Kristof Van, & Toon Goedemé. (2016). Efficient Multiclass Object Detection: Detecting Pedestrians and Bicyclists in a Truck’s Blind Spot Camera. Proceedings - 3rd IAPR Asian Conference on Pattern Recognition, ACPR 2015, 366–70.

El-Zanaty, Fatma, & Ann Way. (2011). Egypt Demographic and Health Survey. Science. Vol. 331.

Forkenbrock, G., Hoover, R. L., Gerdus, E., Van Buskirk, T. R., & Heitz, M. (2014). Blind Spot Monitoring in Light Vehicles — System Performance, no. July: 85.

Guan, Jinhua, Hongwei Hsiao, Bruce Bradtmiller, Tsui Ying Kau, Matthew R. Reed, Steven K. Jahns, Josef Loczi, H. Lenora Hardee, & Dominic Paul T. Piamonte. (2012). U.S. Truck Driver Anthropometric Study and Multivariate Anthropometric Models for Cab Designs. Human Factors 54 (5), 849–71.

Guan, Jinhua, Hongwei Hsiao, Bruce Bradtmiller, Joyce V. Zwiener, Alfred A. Amendola, & Darlene L. Weaver. (2015). Anthropometric Study of U . S . Truck Drivers. Department Of Health And Human Services National Institute for Occupational Safety and Health.

Hong, Gwang-Soo, Jong-Hyeok Lee, Young-Woon Lee, & Byung-Gyu Kim. (2017). New Vehicle Verification Scheme for Blind Spot Area Based on Imaging Sensor System. Journal of Multimedia Information System 4 (1), 9–18.

I Knight, M Dodd, B Robinson, & M Ainge. (2018). Automotive Research and Consultancy HGV Safety Permit for London Safe System. Apollo Vehicle Safety.

Jamaluddin, Muhammad Herman, Ahmad Zaki Shukor, Muhammad Fahmi Miskon, & Fariz Ali Ibrahim. (2016). An Analysis of Sensor Placement f or Vehicle ’ s Blind Spot Detection and Warning System. Journal of Telecommunication, Electronic and Computer Engineering 8 (7), 101–6.

Jung, Kyeong Hoon, & Kang Yi. (2015). Determination of Moving Direction by the Pose Transition of Vehicle in Blind Spot Area. Proceedings of the International Symposium on Consumer Electronics, ISCE 2015-Augus: 4–5.

Kedarkar, Pallavi, Maithilee Chaudhari, Chetna Dasarwar, & P B Domakondwar. (2019). Prevention Device for Blind Spot Accident Detection and Protection. International Research Journal of Engineering and Technology (IRJET) 6 (1), 624–27.

Liu, Guiru, Lulin Wang, & Shan Zou. (2017). A Radar-Based Blind Spot Detection and Warning System for Driver Assistance. Proceedings of 2017 IEEE 2nd Advanced Information Technology, Electronic and Automation Control Conference, IAEAC 2017, 2204–8.

Marshall, R, & Summerskill, S. (2015). Understanding Direct and Indirect Driver Vision in Heavy Goods.

Marshall, R, & Summerskill, S. (2017). An Objective Methodology for Blind Spot Analysis of HGVs Using a DHM Approach. 21ST International Conference on Engineering Design, ICED17 8, 379–88.

Marshall, R, Stephen, S, & Sharon Cook. (2013). Development of a Volumetric Projection Technique for the Digital Evaluation of Field of View. Ergonomics 56 (9), 1437–50.

Mathew, Aleena, E S Krishna Ram, Elizabeth Maria Alex, Gokul G Kumar, Jeslin Elizabeth, & M Satyakumar. (2018). Quantification and Analysis of Blindspots for Light Motor Vehicles. International Journal of Engineering and Advanced Technology (IJEAT) 8 (4): 102–6.

Mazankova, Martina J. (2015). Risks from Blind Spots of Trucks. ICMT 2015 - International Conference on Military Technologies 2015.

Musa, Maslina, Mohd Khairul, Alhapiz Ibrahim, Noor Faradila Paiman, Mohamad Suffian Ahmad, Mohd Firdaus, Mohd Siam, dkk. (2017). Awareness and Prevalence of Vehicle Blind Spot Issues among Lorry Drivers.

Ohlson, Erik, & Anna Lisa Osvalder. (2015). Truck Drivers’ Postural and Visual Behavior an Explorative Study to Understand Expectations on Current Designs and Future Vehicles. Procedia Manufacturing 3 (Ahfe), 6116–23.

Perhimpunan Ergonomi Indonesia. (2013). Data Antropometri Indonesia. 2013.

Pitchipoo, P, Vincent Sundaram, & Rajakarunakaran Sivaprakasam. (2016). Development of Fuzzy Based Intelligent Decision Model to Optimize the Blind Spots in Heavy Transport Vehicles. Promet - Traffic - Traffico 28 (1), 1–10.

Pitchipoo, P, D S Vincent, & N S Rajakarunakaran. (2014). COPRAS Decision Model to Optimize Blind Spot in Heavy Vehicles. Procedia Engineering 97: 1049–59.

Pyykonen, Pasy, Ari Virtanen, & Arto Kyytinen. (2015). Developing Intelligent Blind Spot Detection System for Heavy Goods Vehicles. Proceedings - 2015 IEEE 11th International Conference on Intelligent Computer Communication and Processing, ICCP 2015, 293–98.

Robinson, T, & R Cuerden. (2014). Published Project Report PPR683: Safer Lorries in London : Identifying the Casualties Associated with Side Guard Rails and Mirror Exemptions, 59.

Robinson, Tanya, Iain Knight, Philip Martin, James Manning, & Victoria Eyers. (2016). Definition of Direct Vision Standards for Heavy Goods Vehicles ( HGVs ) Technical Report, 1–138.

Sani, Mohd, Mohamad Hashim, Abdul Halim Ismail, Muhamad Safwan, & Bin Muhamad. (2018). Identifying Blind Spot Zone for Passenger Cars Using Grid-Based Technique. Journal of the Society of Automotive Engineers Malaysia 2 (3), 245–51.

Southall, Dean, Richard Tait, & Walsh Tony. (2019). Drivers ’ Field of View from Large Vehicles Phase 2 : Report.

Summerskill, S., & R. Marshall. (2017). Defining the Requirement for a Direct Vision Standard for Trucks Using a Dhm Based Blind Spot Analysis. Proceedings of the International Conference on Engineering Design, ICED 8 (DS87-8), 329–38.

Summerskill, Steve, & Russell Marshall. (2014). The Design of Category N3 Vehicles for Improved Driver Direct Vision. Technical Report, no. March: 0–118.

Summerskill, Steve, & Russell Marshall. (2015). The Development of a Truck Concept to Allow Improved Direct Vision of Vulnerable Road Users by Drivers. Procedia Manufacturing 3 (Ahfe), 3717–24.

Summerskill, Steve, Russell Marshall, Sharon Cook, James Lenard, & John Richardson. (2019). The Use of Volumetric Projections in Digital Human Modelling Software for the Identification of Large Goods Vehicle Blind Spots. Loughborough Design School Loughborough University.

Tseng, Din-chang, Chang-tao Hsu, & Wei-shen Chen. (2014). Blind-Spot Vehicle Detection Menggunakan Gerak Dan Statis Fitur 4 (6), 516–21.

Vincent, D S. (2016). Optimization of Blind Spot in Heavy Vehicles – A Multi Criteria Decision Making Approach. Department of Mechanical Engineering Kalasalingam University.




DOI: http://dx.doi.org/10.54324/j.mtl.v8i3.505

Refbacks

  • There are currently no refbacks.


Copyright (c) 2022 Muhammad Ilhamdi Rusydi

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

 Creative Commons Licence

Jurnal Manajemen Transportasi & Logistik (JMTRANSLOG) is licensed under a  Creative Commons Attribution-NonCommercial 4.0 International License.

View My Stats