Penerapan Metode Line Balancing dengan Pendekatan Ranked Position Weight, Regional Approach, dan Largest Candidate Rules

Wahyu Poncotoyo, Sesaria Mardhiani Rachma Puspita, Muammar Fuad Zain, Sita Aniisah Sholihah, Anton Ferdiansyah, Yolla Ayutia

Abstract


Line Balancing is an assignment of a number of jobs into interconnected work stations in one line or assembly line with the aim of minimizing idle time on the hydraulic excavator assembly line, the assembly line specification has 27 work stations with 150 work elements. In the process of assembling the hydraulic excavator, there was an overtime that exceeded the takt time at work station 18 (BF 04), which resulted in the failure to achieve the production target of 5 units/day. One way to overcome this problem is to apply the line balancing method on the hydraulic excavator assembly line, the approach used is the Regional Approach, Ranked Positional Weight, and Largest Candidate Rules. Based on the analysis that has been done, it can be concluded that the Ranked Positional Weight approach has the best value with the number of work stations 18, line efficiency of 95.70%, balance delay of 4.30% and idle time of 66.84 minutes and also has good results. better than the initial conditions before the line balancing method was applied. 

Keywords


Assembly Line; Largest Candidate Rule; Line Balancing; Ranked Positional Weight; Regional Approach.

Full Text:

PDF

References


Afifuddin, M. (2019). Penerapan Line Balancing Menggunakan Metode Ranked Position Weight (RPW) untuk Meningkatkan Output Produksi pada Home Industri Pembuatan Sepatu Bola. Journal of Industrial Engineering Management, 4(1), 38. https://doi.org/10.33536/jiem.v4i1.287

Baroto, T. (2002). Perencanaan Dan Pengendalian Produksi (Akhira & L. Krisnawati (eds.)). Ghalia Indonesia.

Basuki, Mahmud.MZ, H. (2018). Perancangan Sistem Keseimbangan Lintasan Produksi Dengan Pendekatan Metode Heuristik. Jurnal Teknologi, volume.11(2), 1–9.

Dharmayanti, I. (2019). Jurnal Manajemen Industri dan Logistik PERHITUNGAN EFEKTIFITAS LINTASAN PRODUKSI. Manajemen Industri Dan Logistik, 01, 43–54.

Febriani, W. P., Saputra, M. A., & Lumbanraja, D. S. B. F. (2020). Penerapan Konsep Line Balancing Dalam Proses. Bulletin of Applied Industrial Engineering Theory, 1(2), 1–6.

Ginting, R. (2011). Sistem Produksi. In Cetakan Pertama, Yogyakarta; Graha Ilmu: Vol. 1 jil. : 2. GRAHA ILMU. info@grahailmu.co.id

Hartini, S., & Suryadi, K. (pendamping). (2011). Teknik Mencapai Produksi Optimal. Lubuk Agung.

Kho, B. (2019). Pengertian Line Balancing (Keseimbangan Lini) dan Cara Menggunakannya. Ilmu Manajemen Industri. https://ilmumanajemenindustri.com/pengertian-line-balancing-keseimbangan-lini-cara-menggunakannya/

Kontraktor, L., Nugrianto, G., Syambas, M., Diky, R., & Demus, N. (2020). Analisis Penerapan Line Balancing untuk Peningkatan Efisiensi pada Proses Produksi Pembuatan Pagar Besi Studi Kasus: CV. Bumen. 2(1).

Muktaman, A. (n.d.). ANALISIS EFISIENSI PRODUKSI TAHU DENGAN METODE LINE BALANCING PADA PABRIK TAHU CV TIGA SAUDARA PRIMA KABUPATEN MALANG.

Nurjaman, R. (n.d.). Analisis Keseimbangan Lintasan Line Produksi Drive Assy Di Pt. Jideco Indonesia. 4(2), 64–71.

Panudju, A. T., Panulisan, B. S., & Fajriati, E. (2018). Analisis Penerapan Konsep Penyeimbangan Lini ( Line Balancing ) Dengan Metode Ranked Position Weight ( Rpw ) Pada Sistem Produksi Penyamakan Kulit Di PT . Tong. Jurnal Integrasi Sistem Industri, 5(2), 12. https://dx.doi.org/10.24853/jisi.5.2.70-80

Setyawan, D., Soegiharto, S., Agus, J., Industri, J. T., Surabaya, U., & Kalirungkut, R. (2012). Perbaikan Sistem Produksi Dengan Metode Line Balancing Pada Perusahaan Pembuat Mesin Pertanian PT Agrindo Di Gresik Di era globalisasi saat ini daya saing di dunia pabrik manufaktur semakin ketat, setiap perusahaan akan berusaha semaksimal mungkin untuk . 1(1), 1–15.

Sitorus, S. C., Andra, B., Namirach, D. P., Pratama, Y., & Sinulingga, S. S. (2020). Keseimbangan Stasiun Kerja Produk Ragum Menggunakan Metode Line Balancing TALENTA Conference Series Keseimbangan Stasiun Kerja Produk Ragum Menggunakan Metode Line Balancing. 3(2). https://doi.org/10.32734/ee.v3i2.1000

Sofyan, D., & Meutia, S. (2019). Vulkanisir Ban Dengan Metode Large Candidate Rule (Lcr ). 5(April), 32–44.

Sugiyono. (2017). Metode Penelitian Kuantitatif, Kualitatif, dan R&D. Penerbiit Alfabeta.

Sutalaksana, I. (2006). Teknik Perancangan Sistem Kerja. Penerbit ITB.

Syahputri, K., Sari, R. M., Anizar, Rizkya, I., Leviza, J., & Siregar, I. (2018). Improving Assembly Line Balancing Using Moodie Young Methods on Dump Truck Production. IOP Conference Series: Materials Science and Engineering, 288(1). https://doi.org/10.1088/1757-899X/288/1/012090

Trenggonowati, D. L., & Febriana, N. (2019). Mengukur Efisiensi Lintasan Dan Stasiun Kerja Menggunakan Metode Line Balancing Studi Kasus Pt. Xyz. Journal Industrial Servicess, 4(2), 97–105. https://doi.org/10.36055/jiss.v4i2.5158

Willem Siahaya. (2012). Manajemen Pengadaan, Procurement Management.

Zadry, H. R., Susanti, L., Yuliandra, B., & Jumeno, D. (2015). ANALISIS DAN PERANCANGAN SISTEM KERJA. Andalas University Press.




DOI: http://dx.doi.org/10.54324/jstl.v2i1.1088

Refbacks

  • There are currently no refbacks.


Copyright (c) 2023 Wahyu Poncotoyo, Sesaria Mardhiani Rachma Puspita, Muammar Fuad Zain, Sita Aniisah Sholihah, Anton Ferdiansyah, Yolla Ayutia

JURNAL SISTEM TRANSPORTASI & LOGISTIK | E-ISSN : 2807-7105

 Creative Commons Licence
JURNAL SISTEM TRANSPORTASI & LOGISTIK is licensed under a  Creative Commons Attribution-NonCommercial 4.0 International License.

Email : jsistem@itltrisakti.ac.id